Choosing the type of fuel is one of the first questions that a person who decides to buy a water heater has to decide. To decide, you need to understand the difference between the two categories.
The main differences between gas and electric equipment
The main differences between gas and electric equipment can be described by answering a few questions:
– what is cheaper to buy and install?
– what will consume less energy?
– what is safer?
– which is more convenient to use?
Which Type is Cheaper?
The cost of the equipment itself can vary greatly depending on the manufacturer. If we take average prices for models of similar quality, then gas sacramento water heaters are cheaper. However, this does not mean at all that you will spend less money when choosing gas equipment. In addition to buying a speaker, you will have to prepare documents and permits for its installation, as well as call specialists for installation. All this means additional costs. Adding them together with the cost of the unit, you will get an amount greater than the cost of the electrical equipment.
The next point to consider is the cost of service. For a gas column, it will also be larger than for an electric boiler. Do not forget that you will have to make a chimney for the gas column.
Despite the fact that the installation of a gas water heater will cost more, this does not mean that you should not choose it. Gas columns have their advantages, which we will talk about a little further down in the article.
Which Type is More Economical?
In terms of cost, gas is now cheaper than electricity and is one of the most profitable types of fuel. Based only on the price of fuel, you can come to the conclusion that the gas column will work more economically, but this is not entirely true. The fact is that flow-through and storage boilers work differently, therefore, they use energy differently.
During the operation of the electric boiler, the maximum load falls on the period during which the boiler heats the volume of water in the tank. After that, the device turns off and switches to economical water heating mode. High-quality thermal insulation, which is inside the tank, protects water from heat loss.
The gas column heats water in real-time – right at the moment when the hot water tap is opened. Firstly, she first needs to warm up the heat exchanger, secondly, the energy of the flame will not be used at 100%.
What is safer – a column or a boiler?
Gas equipment is more dangerous because it is associated with the high flammability of the fuel, the risk of explosion, or carbon monoxide entering the home. For this reason, the installation of the column requires the issuance of permit documents.
You can install the boiler yourself. Among the points that should be taken into account is the quality of the wiring in the house. If the wiring is bad, it can burn out when using a powerful water heater. To install a wall-mounted boiler, you must choose a strong load-bearing wall that can withstand a tank filled with water.
If there are several people living in the house who are used to using the bath, then the burner will not wait for the required amount of water and will dispense it immediately. In the case of a shower, the boiler is the best option, since the temperature of the water at its exit does not depend on the number of simultaneously open intake points.
A small storage electric boiler is suitable for a person who lives alone and does not use water very often. But a large family that does not want to install a huge storage tank can solve the problem with a gas column. In addition, a gas column takes up much less space than a boiler, it can be hung on any wall. This is much more convenient than looking for a place for a large cylinder that will take up space in the bathroom.
The choice of boiler or column will depend on your water needs, the availability of good wiring or a gas line, as well as the availability of free space. In any case, you should choose only high-quality models from proven manufacturers.
Leave a Reply